MKI, MKII and 93/93R Series 25MOA Scope Mount

Item: SAV-13011  In Stock
  Manufacturer: DIP, inc
(19 reviews) Write A Review
MSRP: $41.99 Your Price: $39.97
Item Comments:
Qty to Add:
The (1)25MOA Picatinny(pick a tinny) scope mount designed for ALL Savage MKI, MKII & 93/93R series rimfire rifles with factory drilled & tapped receivers. Designed for those wanting to "Zero" their scope at 200yrds and beyond. Works great when using Picatinny and Weaver style rings on those really long, large objective high powered scopes. Made from billet aircraft aluminum and then hard coat anodized for a long lasting finish. The ejection port area is "cut-out" for easier single shot loading or clearing a stuck spent case. Uses 4 (2)TORX head #15 screws - included.

(2) The NEW factory textured finish(paint) on some models is bleeding into the factory drilled & taped holes on the receiver causing problems installing the screws. You might need the clean the holes by hand with a 6-48 tap!

Recommended Tools:

Purple LocTite(222)
Inch pound torque wrench
#15 TORX driver

(1)25MOA (minutes of angle) means the mount has a slope built in so you can set your scopes "zero" all the way out to 300yrds when you practice with 22 long rifle target ammo. However because of the added slope the 25MOA limits how close you can "zero" to about 50yrds with most scopes.

*Note: "Savage" Ejection port laser engraving may or may not appear on all mounts. IF, you want one engraved, please state so in the comments section of your order.
25MOA built in to the mount to allow most scopes to be "zeroed" anywhere from 50-300yrds with 22LR target or subsonic ammunition

Height - approxmately .31"

Weight - 2oz

Large Ejection port opening allows easy access for single shot loading, feed or ejection/chambering problems.
  • Manufacturer: DIP, inc
  • Shipping Weight: 0.19 lbs
Average Rating   4.894736 stars (based on 19 reviews)
You must be logged in to write a review
Recent Reviews Rating: Reviewed By: Michael F. Review Date: 2/7/2019 Comments: Needed a 20+MOA base for my Mk 1 to reach out to 300+ yards for an upcoming ELR Rimfire Match. Flawless machining, rock solid fit on my receiver and a perfect match to high-end rings. Looking forward to mounting my new SWFA 20X scope with confidence. A...
Read Full Review

Rating: Reviewed By: Jason M. Review Date: 6/30/2018 Comments: Ordered on a Wednesday and got it that Friday. I was looking for a mount that would work with my short tubed scope and found this one. I'm very pleased with the fit and finish and I requested the logo and got it. I will definitely be ordering from here ag...
Read Full Review

Rating: Reviewed By: Charles S. Review Date: 4/21/2017 Comments: Installation was easy, haven't taken it out yet but. I shot another 22lr rifle with a 20moa mount hitting out to 330 yards. Great investment for your off the shelf 22 rifle. Very Happy! (Remember Loc-tite)
Rating: Reviewed By: Bryan L. Review Date: 9/13/2016 Comments: Absolutely perfect fit. If you are super picky like me, you won't be dissapointed. I shoot my mark ii at the 200 yard range dailing in 27 moa and still have alot left over. I have the mark ii trr-sr and this mount was a perfect fit. Great job DIP!!!!
Rating: Reviewed By: Joe S. Review Date: 6/8/2016 Comments: I purchased a base mount for .17 CZ. Very happy with the product. Fits perfectly and easy to install. Ordered Saturday and it arrived here Wednesday. Good seller. Read All Reviews