455/452/453 11mm Extended 25MOA Scope Mount

Item: CZ-19017 In Stock
Manufacturer: DIP, inc

(16 reviews) Write A Review

MSRP: $49.99 Your Price: $42.97

Item Comments:

Qty to Add:

Convert the stock dovetail to a standard Picatinny scope mount with *25MOA built into the rail and extends about 2 slots past the front of the receiver. Adds the extra elevation(MOA) for 22 long rifle so you can set your scope "zero" at 200yrds and beyond for those long shots. Great for standard Weaver or Picatinny rings or quick release rings so you can easily swap optics between rifles. 6 supplied set screws hold the mount firmly to the receivers dovetail. No drilling or tapping required for installation.

Dovetail Chart

If you are NOT sure about the dovetail size of your CZ, measure the widest part(top):

Approximately:

.500 = 3/8

.430 = 11mm

Tools needed:
1/16" Allen
Purple Thread Locker

*25MOA (minutes of angle) means the mount has a slope built in so you can set your scopes "zero" all the way out to 300yrds when you practice with 22 long rifle Target ammo. However because of the added slope the 25MOA limits how close you can "zero" to about 50yrds with most scopes.

Ejection Port may not be engraved with Ceska Zbrojovka

Adds approximately .272" in height to the receiver

Manufacturer: DIP, inc
Shipping Weight: 0.22 lbs

Average Rating

4.8125 stars (based on 16 reviews)

You must be logged in to write a review

Recent Reviews Rating:

Reviewed By: RONALD J. Review Date: 3/22/2021 Comments: Excellent product. Allowed me to fit a 50mm objective to my 452 trainer. With high mount rings and this rail clearance is not an issue.

Rating:

Reviewed By: David G. Review Date: 8/1/2020 Comments: I ordered two of these for two different rifles. With a regular scope, this gets me to 300 yds easily with upward adjustment still remaining. This is is great product at a great price. Shipping is at light speed also.

Rating:

Reviewed By: Fred V. Review Date: 3/23/2020 Comments: This is the best alternative to trying get the 11 mm rings for the peculiar dovetail on a CZ 455. Went on slick and easy, rock solid, and I even waited the 24 hours for the loctite to set up. Now you can mount any standard rings you want. I shot 0.35-.65 ...
Read Full Review

Rating:

Reviewed By: Jeramie W. Review Date: 2/9/2020 Comments: Thoroughly pleased with the quality of this DIP product. Super easy to install. Very good fit and finish. Will definitely recommend to other rimfire shooters in my area.

Rating:

Reviewed By: Greg R. Review Date: 12/29/2018 Comments: Everything arrived quickly.... THANKS Mounted quickly and easily. Have only sighted the gun in at 50 yards. Will play at longer ranges this spring. (mounted on a 455 .17 HMR Varmint) Read All Reviews