Scope Mounts | Rock Island 22 TCM Picatinny Scope Rail - Product Review
Item: RI-11033  In Stock
Manufacturer: DIP, inc
Return To Product Detail
Average Rating
 4.8 stars
(based on 5 reviews)
You must be logged in to write a review

All Reviews For This Product
Page 1 of 1
Reviewed By: Joe M.
Review Date: 11/30/2017
Product appeared to be of high quality, but I found rail did not fit easily. I had to grease rail and pound on with a nylon hammer. In doing so it had "cut" a larger groove into the base and chips would fall off. Once this was done, it went on OK. I feel that my base needed to be machined a bit larger. From what I see the problem may be with the actual rifle and not the base. Tolerances on the rifle seem to vary a lot ! Base is better quality than rifle itself. Rifle receiver cracked in half after only 24 rounds , it was in 9mm. Not fond of Armscor at all,appears cheap steel.

Reviewed By: Michael W.
Review Date: 3/26/2017
I just installed this, and the process was very easy. It fits perfectly and seems to be mounted very securely. Mine did not have a "22 TCM" engraving on the rail which I appreciated because my rifle has been re-chambered to 9mm.

Reviewed By: Kenneth H.
Review Date: 11/9/2016
This is my second product purchase from DIP. This time, as well as the first, I am very happy with the product I received. The fit and finish are what I've come to expect from DIP. No where else was I able to find a solid, custom made picatinny scope mount for my .22 TCM rifle. Now I will have the solid foundation needed for my scope to be mounted as it should be. Thank you DIP! KH

Reviewed By: Bill R.
Review Date: 8/2/2016
Without a doubt this mount is the answer to the dovetail grooves for the RIA / Armscor M22 TCM BA Rifle. They couldn't have made it any easier. You literally just slide it onto the reciever and tighten up the six allen screws included (don't over tighten and use a little Loc-tite)... You wont be sorry with this mount because you'll be able to use more scope ring options.

Reviewed By: Dale K.
Review Date: 2/20/2016
This mount is the absloute answer to the groove that comes on the TCM rifle. Very high quality and the machine work is second to none, rail fit perfectly. I used weaver scope rings and mounted a Leopold VX-R 1-4 20 mm scope and could not be more pleased. Thanks for a fine made in USA product!
Page 1 of 1