Marlin 3/8" 25MOA Picatinny Scope Mount

Fits most all pre-2005 Marlin semi-auto rimfire rifles
Item: MAR-15012  In Stock
  Manufacturer: DIP, inc
(5 reviews) Write A Review
Share:
MSRP: $31.99 Your Price: $29.97
Item Comments:
Qty to Add:
The Marlin 3/8" dovetail rail is cut with Picatinny slots so you can use Picatinny or Weaver style rings and accessories. The additional (1)25MOA slope built into the rail allows you to easily "zero" your scope at 200yrds or more.
The slots allow you to locate the optics exactly where you need them to be. Fits the model 60, 795 and other semi-auto rimfire Marlins.

(1)25MOA (minutes of angle) means the mount has a slope built in so you can set your scopes "zero" all the way out to 300yrds when you practice with 22LR target ammo. However because of the added slope the 25MOA limits how close you can "zero" to about 50yrds with most scopes.

NO Drilling & Tapping required: held in place with 6(supplied)  1/16" Allen drive set screws

Recommended Tools:
Purple Thread Locker

1/16" Allen wrench
Inch pound torque wrench


Note:
New rifles MAY require fitting.



The part number or white mark on the bottom of the rail should be placed forward toward the muzzle.
6061 T6 Aircraft aluminum
Mil Spec Hard coat anodized
CNC machined from billet
Adds approximately .220" to the receiver height

25MOA built in to the mount to allow most scopes to be "zeroed" anywhere from 50-300yrds with 22LR target or subsonic ammunition.


Note:
Some minor fitting may be required because of the receivers dovetail wide tolerances. If you have a rifle that is less then 3yrs old, you need to check carefully and make sure the factory cut the dovetail in the receiver correctly. We have noticed a number of the newer receivers without or VERY little dovetail groove.
  • Manufacturer: DIP, inc
  • Shipping Weight: 0.15 lbs
Average Rating   4.4 stars (based on 5 reviews)
You must be logged in to write a review
Recent Reviews Rating: Reviewed By: Stefanos D. Review Date: 6/28/2019 Comments: Great Product. Well made. Also very quick delivery service. Ordered Tue got it on Fri.. Would have to pay extra for that quick delivery... Thanks DIP...
Rating: Reviewed By: Ryan J. Review Date: 3/11/2014 Comments: Quality product. Looks good and installed without any issues. Will help me out on making 300+ yard shots with a .22LR this summer.
Rating: Reviewed By: Thomas H. Review Date: 7/19/2013 Comments: I purchased this for my Marlin 60SS (purchased in 2012). The product arrived in 2 days via USPS. I was impressed! The rail slid right onto the dovetail without issue. I have not yet fired the gun since I just mounted the scope last night. I have no ...
Read Full Review

Rating: Reviewed By: Cory S. Review Date: 7/8/2012 Comments: I put this rail on a 1993 model 60, there was no fitting required as it slid on perfectly. I did try it on a newer rifle and it did not fit at all (not my rifle) since I am trying to shoot at longer distances I got an older rifle with a longer barrel, too...
Read Full Review

Rating: Reviewed By: Jake Review Date: 7/19/2011 Comments: Good product hard to install install time about 30 min. slides on vary tight hammer required. had to use a wooden dowel and taped in in from the top with the gun pointing up. made of aluminum be vary careful not to bend while tapping onto the 3/8 inch ra...
Read Full Review
Read All Reviews