Rock Island 22 TCM Picatinny Scope Rail

Item: RI-11033 Back Ordered
Manufacturer: DIP, inc

(6 reviews) Write A Review

Your Price: $34.97

Item Comments:

Qty to Add:

NEW from DIP the Rock Island 22 TCM(Armscor) scope rail. Fantastic improvement over the dovetail rings because now your ring selection between Picatinny or Weaver is limitless. Very easy to install(1) and held in place with the 6 supplied set screws.

We were informed that the New TCM receivers are drilled and tapped. This rail will NOT fit the factory drilled & tapped receivers and is held in place with set(grub) screws for the earlier models.

No gunsmith needed

Recommended tools:
Inch pound torque wrench
Purple LockTite
1/16" Allen

(1) Remove the Allen screw(see photos) from the front of the receiver above the barrel before installing the rail, slide the rail onto the receiver and re-install the Allen screw. Follow the included instructions to complete the installation.

Note: Engraving may not appear on the rail in the ejection port opening

Made from 6061 and only adds about .30" to the top of the action.

Manufacturer: DIP, inc
Shipping Weight: 0.12 lbs

Average Rating

4.833333 stars (based on 6 reviews)

You must be logged in to write a review

Recent Reviews Rating:

Reviewed By: Bruce K. Review Date: 10/15/2021 Comments: Perfect fit no issues recommend these guy's, AAA+++ seller and fast shipping as well. Will be doing business with them again. Thanks. Bruce..

Rating:

Reviewed By: Joe M. Review Date: 11/30/2017 Comments: Product appeared to be of high quality, but I found rail did not fit easily. I had to grease rail and pound on with a nylon hammer. In doing so it had "cut" a larger groove into the base and chips would fall off. Once this was done, it went on OK. I feel ...
Read Full Review

Rating:

Reviewed By: Michael W. Review Date: 3/26/2017 Comments: I just installed this, and the process was very easy. It fits perfectly and seems to be mounted very securely. Mine did not have a "22 TCM" engraving on the rail which I appreciated because my rifle has been re-chambered to 9mm.

Rating:

Reviewed By: Kenneth H. Review Date: 11/9/2016 Comments: This is my second product purchase from DIP. This time, as well as the first, I am very happy with the product I received. The fit and finish are what I've come to expect from DIP. No where else was I able to find a solid, custom made picatinny scope moun...
Read Full Review

Rating:

Reviewed By: Bill R. Review Date: 8/2/2016 Comments: Without a doubt this mount is the answer to the dovetail grooves for the RIA / Armscor M22 TCM BA Rifle. They couldn't have made it any easier. You literally just slide it onto the reciever and tighten up the six allen screws included (don't over tighten ...
Read Full Review Read All Reviews