455 Silver 11mm 25MOA Scope Mount

Item: CZ-19018S  In Stock
  Manufacturer: DIP, inc

***New Silver Anodized to fit the 455 Stainless rifle
Convert the stock dovetail to a standard Picatinny scope mount with *25MOA built into the rail so you can use just about any Weaver or Picatinny style ring. Adds the extra elevation so you can set your scope "zero" at 200 yards and beyond for those long shots. Great for quick release rings so you can easily swap optics between rifles. 

Easily attaches with the 6 supplied set screws(see photo) to hold the mount firmly to the receivers dovetail. No drilling or tapping required for installation.

Fits:
ALL 455 models

Adds approximately .230" to the receiver height

Please see the Chart Here, of the CZ catalog or measure the top of your dovetail.

If you are NOT sure about the dovetail size of your CZ, measure the widest part(top): 

Approximately:

.500 = 3/8

.430 = 11mm


Tools needed:
1/16" Allen
Purple Thread Locker


*25MOA (minutes of angle) means the mount has a slope built in so you can set your scopes "zero" all the way out to 300 yds when you practice with 22 long rifle. However because of the added slope the 25MOA limits how close you can "zero" to about 60 yds with most scopes.

6061 Aircraft Aluminum

Set screw Torque - 6-7in pounds

Mil Spec Hard Coat Anodized

• Manufacturer: DIP, inc
• Shipping Weight: 0.14 lbs

Be the first person to review this product You must be logged in to write a review